High frequency screen replacement method
Writer： admin Time：2020-09-17 13:45 Browse：℃
What are the precautions for the replacement of the high frequency vibrating screen and the inspection before operation? High-frequency screens are widely used in the operation industry. The circular high-frequency screens are a form and have better use effects. However, when changing the high-frequency screen, you need to follow a certain method. Today, the high-frequency screen manufacturer will introduce you to the high-frequency screen replacement and the precautions for inspection before operation, so that you can understand the high-frequency screen in more detail.
The screen change procedure of the high frequency screen can be divided into two parts: the inspection before the screen change and the implementation of the screen change step.
1. The inspection before the operation of the high frequency screen is very important.
1. Check whether the form and specification you ordered are consistent;
2. Whether it is damaged or bruised during operation;
3. Whether the half-distributed power supply is consistent with the nameplate identification, note: the voltage error should not exceed ±5%;
4. Whether each solid part is loose, the grounding wire must be installed firmly;
2. High-frequency screen replacement method:
1. Loosen the six plastic rubber head nuts, remove the upper hopper and the net ring.
2. The fine mesh should be placed horizontally upward on the mesh ring.
3. Press the round bar tightener from top to bottom into the bottom annular groove and lock it.
4. Repeat the above steps to press the tightener into the upper annular groove and lock it.
5. Use scissors to cut off the excess screen.
The above are the precautions for high frequency screen replacement and pre-operation inspection introduced by Chaishang Trading Company. If there are other questions about high-frequency screens, please call for detailed inquiry.
