Dezhou Chaishang Shangmao Co.,Ltd. is one of the leading China Mining wear-resistance accessories Phone: 86-15621266667
Polyurethane screen phone

iphone:86-15621266667

Company news

How to maintain the dehydration screen

Writer: admin Time:2020-04-17 11:20 Browse:

  How to maintain polyurethane dehydration screen? Let's understand with polyurethane screen manufacturers:
  Dehydration screen adopts double electrode self-synchronization technology, universal eccentric block, adjustable amplitude vibrator. It is mainly composed of screen box, vibration exciter, support system and motor. Two unconnected vibrators are driven by the tape coupling shaft to perform synchronous reverse operation. The centrifugal force generated by the two sets of eccentric masses is superimposed on the vibration direction, and the reverse centrifugal force cancels out, thereby forming a single excited vibration along the vibration direction. To make the screen box reciprocate linearly.

  Dehydration screen use and maintenance

  ⒈This machine should be equipped with electrical protection device.
  ⒉In the initial operation of the machine, check the anchor bolts at least once a day to prevent loosening.
  ⒊When the direction of motor rotation does not meet the requirements, just adjust the phase sequence of the power supply.
  ⒋The motor should be well lubricated. Replenish the lithium-based grease (ZL-3) every two weeks or so. When refueling, add an appropriate amount of lithium-based grease through the oil cup. When using sealed bearings, the motor does not have an oil cup installed.
  ⒌After the machine has been running for 1500 hours, the bearing should be checked, and if there is serious damage, it should be replaced immediately.
  ⒍When the unit is left for a long time and then used again, the insulation resistance should be measured, which is used for 500 volt megohm meter measurement, and it should be greater than 0.5 megohm.
Polyurethane dewatering screen

  Daily maintenance of dewatering screen

  ⒈Before starting:
  (1) Check the coarse mesh and fine mesh for damage
  ⑵Check whether the transportation support is dismantled.
  ⒉ At startup:
  ⑴Be aware of abnormal noise
  ⑵ Is the current stable?
  ⑶ Vibration abnormality
  ⒊ After use: Clean up after each use.
  Regular maintenance of dewatering screen
  Regularly check the coarse mesh, fine mesh and spring for fatigue and damage. Check whether the parts of the fuselage are damaged due to vibration. Lubricate the parts that need to be lubricated.
  Polyurethane dewatering screens must be carefully maintained in daily use, and regular maintenance can prolong the service life. For other questions about dewatering screens, please call Jiding Environmental Protection Technology Company for detailed inquiries.

CATEGORIES

CONTACT US

Company: Dezhou Chaishang Shangmao Co.,Ltd.

Contact: Jack Ma

Fax: 86-534-2798881

Phone: 86-15621266667

Email: Jackma@dzchaishang.com

Add: Room1016, Donghui Building ,Dezhou City , Shandong Province , China.

Scan the qr codeClose
the qr code